Stretch Chopper 2.5 Gallon Gas Tank fits Harley-Davidso
NEW STEEL TANK IN STOCK
PRODUCT DESCRIPTION:
- Gas tank has a right side petcock opening and a fuel capacity of 2.5 gallons. This stretch chopper tank has a flat bottom for universal mounting on extended neck frames.
- Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean condition and seal to help stop leaks and prevent corrosion. Check petcock opening making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of the petcock. Center-to-center mounting holes measure 9-1/2 from front to back and both sets of holes are 3-1/2 wide apart. Features 5/8 -18 thread hole for petcock. Uses screw-in type cap .FITS THE FOLLOWING BIKE APPLICATIONS
0- Harley-Davidson CustomCUSTOM CHOPPERS
Manufacturer: Gatling
Unit Of Measure: Each
Approx. Weight: 15 pounds (lbs)
Front Tunnel Height: 4 inches
Rear Tunnel Height: 1/2 inches
Rear Height: 1-1/2 inches
Front Height: 8 inches
Rear Width: 3 inches
Bottom Length: 19 inches
Top Length: 23-1/2 inches
Tunnel Length: 23 inches
Front Width: 9-1/2 inches
Stretch Chopper 2.5 Gallon Gas Tank fits Harley-Davidso
NEW STEEL TANK IN STOCK
PRODUCT DESCRIPTION:
- Gas tank has a right side petcock opening and a fuel capacity of 2.5 gallons. This stretch chopper tank has a flat bottom for universal mounting on extended neck frames.
- Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean condition and seal to help stop leaks and prevent corrosion. Check petcock opening making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of the petcock. Center-to-center mounting holes measure 9-1/2 from front to back and both sets of holes are 3-1/2 wide apart. Features 5/8 -18 thread hole for petcock. Uses screw-in type cap .FITS THE FOLLOWING BIKE APPLICATIONS
0- Harley-Davidson CustomCUSTOM CHOPPERS
Manufacturer: Gatling
Unit Of Measure: Each
Approx. Weight: 15 pounds (lbs)
Front Tunnel Height: 4 inches
Rear Tunnel Height: 1/2 inches
Rear Height: 1-1/2 inches
Front Height: 8 inches
Rear Width: 3 inches
Bottom Length: 19 inches
Top Length: 23-1/2 inches
Tunnel Length: 23 inches
Front Width: 9-1/2 inches
Stretch Chopper 2.5 Gallon Gas Tank fits Harley-Davidso
NEW STEEL TANK IN STOCK
PRODUCT DESCRIPTION:
- Gas tank has a right side petcock opening and a fuel capacity of 2.5 gallons. This stretch chopper tank has a flat bottom for universal mounting on extended neck frames.
- Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean condition and seal to help stop leaks and prevent corrosion. Check petcock opening making sure the petcock can be easily installed. Petcock fitting should be masked or plugged during painting for easy installation of the petcock. Center-to-center mounting holes measure 9-1/2 from front to back and both sets of holes are 3-1/2 wide apart. Features 5/8 -18 thread hole for petcock. Uses screw-in type cap .FITS THE FOLLOWING BIKE APPLICATIONS
0- Harley-Davidson CustomCUSTOM CHOPPERS
Manufacturer: Gatling
Unit Of Measure: Each
Approx. Weight: 15 pounds (lbs)
Front Tunnel Height: 4 inches
Rear Tunnel Height: 1/2 inches
Rear Height: 1-1/2 inches
Front Height: 8 inches
Rear Width: 3 inches
Bottom Length: 19 inches
Top Length: 23-1/2 inches
Tunnel Length: 23 inches
Front Width: 9-1/2 inches